The Bottom discharge bulk bag is a type of FIBC bag whose bottom is cut with a round hole and sewn with a coated PP woven spout with a diameter of 30cm - 50cm, a length of 45cm - 50cm. A tie will be attached to the side of this discharge spout. This bag is used to store granular and powdered products such as Cement, chemicals, oxide powder, plastic granules, flour, rice, coffee, pepper, etc. For a quicker and easier packing and unloading process.
Specification of full Bottom discharge bulk bags
Discharge spout FIBC bulk bag is made from woven PP fabric (polypropylene), usually coated fabric. The fabric weight is from 120g/m2 to 250g/m2 depending on the working load and product properties. Meanwhile, the bag’s top has a weight from 80gr/m2 - 120 gr/m2 and has a tie.
The bulk bags with discharge spouts usually have a filling spout or a skirt cover and can be individually designed depending on the goods
The bag’s bottom is sewn with a round tube called a discharge spout, with a diameter of 30 - 70cm, a height of 50 - 70cm (according to the discharge device). The spout is made of coated PP woven fabric with a weight of 80 - 120 gr/m2 and reinforced with a star/ petal closure, threaded with ropes or parachute cords to tie, draw and keep the bottom from sagging or podium.
The bulk bags with discharge spouts usually have a filling spout or a skirt cover and can be individually designed depending on the goods, means of transport, and conditions of the customer.
The body
Has fabric weight from 120g/m2 to 250g/m2 depending on the working load and the nature of the packed product. The inside of the bag can be coated with an extra layer to prevent moisture.
The top
There is a round tube called a filling spout with a diameter of 30 - 70cm, a height of 50 - 70cm (according to the filling equipment). Fabric weight from 80 - 120 gr/m2, with a tie.
The bottom
The bag’s bottom is sewn with a round tube called a discharge spout, with a diameter of 30 - 70cm, a height of 50 - 70cm (according to the discharge device).
The bag is designed with 4 lifting loops to fix the bag on the filling device and move it by forklift
The spout is made of coated PP woven fabric with a weight of 80 - 120 gr/m2 and reinforced with a star/ petal closure, threaded with ropes or parachute cords to tie, draw and keep the bottom from sagging or podium.
Loops
The bag is designed with 4 lifting loops to fix the bag on the filling device and move it by forklift. The bag can be sewn with 2 more stevedore straps to lift the bags by crane.
Advantages of the Discharge spout FIBC bulk bags
FIBC bags can automatically discharge goods, so it is very convenient and time-saving, limits dust and spillage to ensure hygiene in the loading and unloading areas, and protects the environment in general.
.png)
FIBC bags can automatically discharge goods, so it is very convenient and time-saving
Using this bag is also very simple. To discharge, you just need to fix the bag on the discharger with a bottom lifting platform or raise the bag to a height of 1.5m if unloading in an empty yard. Next, you untie the drawstring at the bottom, open the star/ petal closure to bring out the discharge spout then untie it. When nearly finishing the unloading process, you should shake the bulk bags to get all the products out.
Readers have just learned about the Bottom discharge bulk bag and its advantages. Hope EPP's sharing has helped you better understand the product. If you have a need to use Jumbo bags, please contact EPP Vietnam Co., Ltd at hotline 84 986 002 888 for the most detailed advice.
🌐Website:https://epp.vn// https://eppvietnam.trustpass.alibaba.com/
📲Ms. Jennifer: +84 962 055 998 - sales02@epp.vn
📲Ms. Charlie: +84 986 002 888 - sales@epp.vn